SUNBOW
Home> Products >UIT/UP Equipment >article
HJ-III Ultrasonic Impact Treatment Equipment
Updating Time:2016-1-13 11:33:22 Hits:

HJ-III Ultrasonic Impact Treatment Equipment
wins
National Innovation Fund ,2011(China)

SUNBOW UIT =INTERNATIONAL QUALITY

Our international customers as follows

HYUNDAI ROBOTICS OF NORTH AMERICA;
MCC BUSINESS SOLUTIONS;
Daewoo Shipbuilding & Marine Engineering Co.,Ltd

 

UIT BROCHURES 2013v1.1.pdf

The new generation Ultrasonic Impact Treatment (UIT) equipment is based on Piezoelectric Ceramic Transducer ( PCT )  technology,   first developed by Sunbowtec for use around the world in 1995. It’s the new direction of UIT technology and has already received international recognition.

ADVANTAGES

  • HIGHER EFFICIENCY
    • Transfermation rate of piezoelectric ceramic transducer is nearly 50%  higher than that of megnetostriction transducer(MT).
  • DIGITAL CONTROL
    • Closed-loop control with DSP chip  ensures stabilization of the generator unit.
  • NO WATER COOLING REQUIRED 
    • The ( PCT ) transducer generates less heat than ( MT ) type transducers. Therefore only integral  fan cooling of the (UIT) tool is required.
  • DUTY CYCLE
    • Over 16 hours  of continuous operation if required.
  • APPLICABILITY
    • Suitable for all metallic materials such as high strength steel of 1400 MPa, titanium alloys, aluminium alloys, etc. 

1. The theory of ultrasonic impact treatment

Ultrasonic impact treatment equipment is consisted of 2 parts. One is ultrasonic impact gun and the other is power control box. This equipment gives the high power to the head of the impact gun, forcing it to impact the metal surface at a speed of over 20,000 times per second, which makes the surface a great plastic transmogrification. At the same time, the impact changes the stress field, dispersing tension stress while transforming it into beneficial compression stress. Also, the sharp increase and decrease of the surface temperature changes the surface metal organization so that enhance it.

2.   How to increase the fatigue life by UIT(ultrasonic impact treatment)

Normal welding usually leaves defects in the joint part, including excess weld metal, rut, undercut and so on, which causes serious stress centralization. Meanwhile, welding causes residual stress. All these factors above do harm to the fatigue quality. Also, these is usually dross in the surface of toe zone, which accelerates the outburst of fatigue crack..

Using UIT equipment to process toe zone after welding, we can make a smooth transition to decrease stress centralization by excess weld metal, dispersing defects in the surface of toe zone. At the same time, it creates compression stress there by compression plastic deformation and adjust residual stress field, enhancing the intensity and hardness of toe zone.

3. Parameters
   

Order No.

1-010-0010

1-010-0011

1-010-0012

1-010-0013

1-010-0014

 Type

HJ-I

HJ-II-LE

HJ-II-SE

HJ-III

HJ-III-XE

Specification

 

 

 

 

 

Control mode

Simulating control

Digital control

Transducer

Piezoelectric ceramic

Output power

400W

600W

Exciting current

0-3A

0-4A

Work frequency

20.0±0.5kHz

19.5±1.0kHz

17.5±2.0kHz

Max amplitude

35μm

40μm

50μm

Travel speed

4-15mm/s

6-18mm/s

6-20mm/s

6-25mm/s

Duty circle

85%

90%

95%以上

Control of constant current output

Silicon control

IGBT chopper control

DSP slug control

Size&weight

 

 

 

 

 

Box size

660mm×440mm×365mm

Generator unit

355mm×205mm×255mm

390mm×235mm×282mm

Size of UIT tool

Φ83mm×475mm

Φ83mm×325mm

Total weight

32kg

30kg

Weight of generator unit

10.5kg

10.6kg

Weight of UIT tool

3.1kg

2.3kg

Assembly

 

 

 

 

 

Digital generator unit

-

-

-

s

s

Simulating generator unit

s

s

s

-

-

LCD

-

-

-

s

s

Nixie readout

s

s

s

-

-

BCSC UIT tool

-

-

s

s

s

BCLY UIT tool

-

-

-

-

DS UIT tool

-

-

-

-

XTT UIT tool

-

-

-

-

s

PT UIT tool

s

s

-

-

-

Φ3 guide head

-

-

s

s

s

Φ4 guide head

s

s

s

s

s

Φ5 guide head

-

-

s

s

s

Φ6 guide head

-

-

s

s

s

Φ3 floating pins

-

-

s

s

s

Φ4 floating pins

s

s

s

s

s

Φ5 floating pins

-

-

s

s

s

Φ6 floating pins

-

-

s

s

s

Protective headphones,ear plugs

s

s

s

s

s

Protection block

s

s

s

s

s

Description

 

 

 

 

 

 

Suitable for low strength alloy materials.Non-continuous operation.

Suitable for all metallic materials including titanium alloys.Non-continuous operation

Suitable for all metallic materials including titanium alloys.Up to 16 hours continuous operation.


s_standard configuration,-_no configuraaion,△_matching,Power supply is 220vac,50/60Hz.

4. Equipment appearance

Ultrasonic Impact Treatment Equipment

UIT TOOLS

Ultrasonic Impact Treatment GUN

uit

5.Excellent effect

UIT equipment can be used in the process of almost all kinds of metal after welding. It is the most efficient seasoning method to disperse residual stress and creating compression stress. By using it, the fatigue strength of steel joint increases by 60-180%, the fatigue life prolongs by 30-130 times. The fatigue strength of Al, Ti joint increases by 26-44%, the fatigue life prolongs by 5-40 times.

Ultrasonic Impact Treatment EquipmentUltrasonic Impact Treatment Equipment

Ultrasonic Impact Treatment EquipmentUltrasonic Impact Treatment Equipment

UIT UP Ultrasonic impact ultrasonic peeningultrasonic impact treatment ultrasonic peening


 
Site Map | Contact Us | About SUNBOW | Links
Copyright © Sunbow Technology 2007-2010 All rights reserved.